 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679 |
|
|
|
|
Back to Product Category
|
AIR
BALANCER
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Because
the Yale Air Balancer offers a float capability, positioning
of materials
is easily accomplished. This makes the balancer ideal
for applications that require
relatively fast movement and accurate positioning. A hoist,
on the other hand, has
fixed stop positions with no float. Therefore, accuracy
of positioning depends on
lifting speed and operator dexterity. Applications particularly
suited to the Yale
Air Balancer include palletizing and stacking, pick and
place, load and unload.
The float capability is especially valuable for tool balancing
and assembly. |
|
|
|
|
|
|
|
|
|
CAPACITY
- 500 Lbs. |
|
EFFORT
- Minimal. |
|
|
|
AIR
PRESSURE - Only 90 psi (6 bar) required for rated
capacity. |
|
Engineered
for applications that require precise positioning or repetitive
transferring of loads as heavy as 500 lbs. (600 lbs. for
double reeved models).
By making loads virtually weighless, the Yale Air Balancer
increases employee
productivity, reduces fatigue, and alleviates risk of
cumulative trauma disorder.
Operators can lift and position loads precisely, time
after time, regardless of
personal strength. |
|
VERSATILE
FLOAT CAPABILITY |
|
Once
the load is positioned at the desired elevation, the Yale
Air Balancer
provides float capability. For units with pendant control,
the float is 8 inches up
and down. For units with balance control, float is the
entire working range. The
float feature allows the operator to position the load
easily and precisely by hand. |
|
100%
DUTY CYCLE |
|
Due
to the operation of its pneumatic power source, there
is no limit to the
number of start/stop cycles the Yale Air Balancer can
perform. The resulting
performance allows for reliable productivity. |
|
LOST
LOAD PROTECTOR* |
|
Because
protection from injury due to loss of an unsupported load
is one of the
industry's most vital concerns, the Yale Air Balancer
features the Lost Load
Protector. Should the load be released accidently, the
control system
immediately stops the rapid upward movement of the chain
and attachments,
thus preventing possible injury to the operator. |
|
|
LOCK
OUT-TAG OUT DEVICE* |
|
|
An
additional safety feature is the Lock Out-Tag Out Device.
If the balancer
should malfunction, sustain damage, or require maintenance,
the device can be
set to prevent the compression of air in the cylinder,
making it impossible to
operate the balancer. The balancer can be returned to
service by
resetting/reinstalling the device. |
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
Handshake-Style
Pendant Control
|
|
Swiveling
Hook
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ADDITIONAL
YALE AIR BALANCER FEATURES: |
|
|
|
|
|
|
True vertical chain travel. |
|
Single reeved units have vertical working range up to
80
inches (2032 mm). Double reeved units have
40 inches
(1016 mm). Extended working range up to 130
inches
(3302 mm) available on units through 300
lbs. (136 kgs.). |
Chain lift medium, unlike wire rope, won't spin or fray.
Chain also provides flexibility and longevity. |
|
Exclusive 18-pocket, oblique lay liftwheel assures smooth
balancer operation. |
|
|
Ergonomically designed handshake-style pendant control
keeps wrist and thumb in a neutral position. |
Lower hook swivels, allowing the operator to rotate the
load without twisting the chain. |
|
|
Ball bearings at all rotating points. |
Convenient built-in air supply port for hook-up to air
powered end tools. |
|
Adjustable lowering speed. |
|
Standard control hose length is 9 feet (2.7 mm). External
strain relief for control hose - standard. |
Can be double reeved, increasing the ultimate capacity
to
600 lbs. (272 kgs.). 500 lb. (228 kgs.) models
- single
reeved only. |
|
|
Lifetime Warranty. |
|
Made in USA. |
|
| SINGLE
REEVED CAPACITIES |
|
CONTROL
OPTIONS |
| 120
Lbs. / 55 Kgs. |
|
200
Lbs. / 91 Kgs. |
|
|
Pendant
Control - Allows operator to maneuver loads up
and down. 16 inch float enables operator to maneuver
suspended load manually. |
| 300
Lbs. / 136 Kgs. |
|
500
Lbs. / 228 Kgs. |
|
|
|
|
|
|
|
|
|
|
|
|
Single
Load Balance Control - For load such as a fixture
or tool used on a production line. Control is mounted
on the
balancer and set by operator to suspend the load; operator
uses float to maneuver load manually over entire working
range. Dual Load and Multiple Load Balance Control also
available. |
|
|
|
|
|
|
DIMENSIONS
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
120 |
200 |
300 |
500 |
|
A dia. in inches (mm) |
7.75 (197) |
9.63 (245) |
11.63 (296) |
11.63 (296) |
|
B in inches (mm) |
2.00 (51) |
1.38 (35) |
.38 (10) |
.38 (10) |
|
C in inches (mm) |
20.33 (517) |
20.33 (517) |
20.45 (520) |
31.0 (787) |
|
|
*
Nominal dimension based on the standard
length of chain supplied with the Yale Air
Balancer. The chain may be shortened by the
customer. |
|
|
|
|
Dimensions
are in inches (mm). |
|
90
psi air (6 bar) input is required to operate at the rated
capacity. |
|
|
|
|
|
|
Color:
Yellow tubes with aluminum center and
end plates. |
|
|
|
|
|
PRICING
AND SPECIFICATIONS FOR AIR BALANCER
|
|
Model Number |
Cap. (lbs.) |
Type of control |
Working* range (in) |
Reach** (in) |
***Ship wt. |
Price |
|
YB-120P8 |
120 |
Pendant |
80 |
144 |
60 |
$3,048 |
|
YB-120B8 |
120 |
Balance |
80 |
144 |
60 |
$3,048 |
|
YB-200P8 |
200 |
Pendant |
80 |
144 |
68 |
$3,413 |
|
YB-200B8 |
200 |
Balance |
80 |
144 |
68 |
$3,413 |
|
YB-300P8 |
300 |
Pendant |
80 |
144 |
84 |
$3,769 |
|
YB-300B8 |
300 |
Balance |
80 |
144 |
84 |
$3,769 |
|
YB-500P8 |
500 |
Pendant |
80 |
144 |
98 |
$4,936 |
|
YB-120DB8 |
120 |
Dual Balance |
80 |
144 |
60 |
$3,724 |
|
YB-200DB8 |
200 |
Dual Balance |
80 |
144 |
68 |
$4,138 |
|
YB-300DB8 |
300 |
Dual Balance |
80 |
144 |
86 |
$4,494 |
|
YB-120P13 |
120 |
Pendant |
130 |
144 |
60 |
$3,558 |
|
YB-200P13 |
200 |
Pendant |
130 |
144 |
68 |
$4,138 |
|
YB-300P13 |
300 |
Pendant |
130 |
144 |
86 |
$4,719 |
|
| Note:
Standard control hose drop is 9 ft. Hook suspension -
P.O.A. |
| *
Working range: Vertical distance from the bottom of the
balancer to the hook in the lowest position. |
| **Reach:
Vertical distance from the bottom of the balancer to the
hook in the lowest position. |
| Actual
reach may be adjusted at installation, and under no circumstances
should it be less than 84 inches. |
| ***Weights
listed are for units with pendant controls and do not
include the Low Headroom Trolley or suspension plate. |
| For
units with balance control, reduce the listed weights
by 4 lbs. |
| Top
Hook Adder for Balancer |
| Single |
$211 |
|
| Double |
$349 |
|
|
|
PRICING
FOR BALANCER ADAPTER BRACKET
|
|
|
Model Number |
For use on manufacturer |
Price |
|
BA-1 |
Yale
YBT-5 |
$108 |
|
BA-2 |
CM
Loderail & Unified |
$108 |
|
BA-3 |
Gorbel |
$108 |
|
BA-4 |
KBK |
$108 |
|
| Note:
For hook suspension - P.O.A. |
|
| Yale
Air Balancer Low Headroom Trolley |
|
| The
Low Headroom Trolley is optional and must be ordered as
an additional item for the Yale Air Balancer. Includes
balancer adapter bracket. Other suspensions systems are
available. |
|
|
PRICING
FOR BALANCER LOW HEADROOM TROLLEY
|
|
Model
Number |
Rated
Cap. (lbs) |
Ship wt.
(lbs) |
Beam flange
width range in inches |
Min. radius
curve in inches |
Price |
|
YBT-5 |
500 |
24 |
2 5/8 thru 5 5/8 |
24 |
$246 |
|
|
Back
to Product Category |
 |
|