FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

405 SERIES

OMNI-LIFT DRUM RACKERS
LIFT, ROTATE AND RACK YOUR DRUMS
RACK YOUR DRUM UP TO 6' (183 cm) HIGH omni lift drum racks
LIFT AN UPRIGHT OR HORIZONTAL DRUM
CONTROL THE LIFT HEIGHT & POURING ANGLE
EASILY HANDLED BY ONE PERSON
HEAVY-DUTY HYDRAULICS
CAPACITY: 800 lb. full drum, 500 lb. half drum*
omni lift drum racks
RACK YOUR DRUM
Quickly and efficiently lift and rack your drum up to
six feet (1.83 m) high. The Omni-Lift moves easily on
its two 8” (20.3 cm) wheels and two 4” (10.2 cm)
casters. Clearance for 8” wheels is required under
the lowest shelf. Drum cradles on rack must be no
wider than 16” for steel drum, or no wider than
11” for plastic drum. Use Option # AP405 for
plastic drum.
LIFT YOUR DRUM
omni lift drum racks
Use the Omni-Lift Drum Racker to pick up or place
an upright or horizontal drum on the floor. Secure your
drum in the holder with the chain tightening ratchet and spring
loaded pawl assembly. The drum holder is designed with
strong teeth and redundant safety features for reliability
and ease of use.
Manual tilt models have hand crank tilt control with safety gear
covers. We recommend the MORStop Tilt-Brake option
(shown below) on all manual tilt models. Power lift and tilt
options provide a more ergonomic solution to drum
handling (see below).
LOAD YOUR DRUM ROLLER
You can place a 55-gallon steel drum onto the wheels
of a Morse open end of a Stationary Drum Roller or
onto a Portable Drum Roller (Not when equipped with
accessory AP405). Model 405-114 is shown above
loading a 55-gallon steel drum onto model
1-5154/20-1 Stationary Drum Roller.
omni lift drum racks POUR YOUR DRUM
You may also use Omni-Lift Drum
Rackers for controlled dispensing.
Model 405-114 with air power lift and
tilt is shown here pouring a drum.
* Half-full rating is based on tilt mechanism's capacity for handling a
bottom heavy drum. A partially full drum with unbalanced and shifting
load is harder to tilt than a full drum.
TYPICAL RACK CONFIGURATION
rack configuration
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING FOR OMINI-LIFT™ DRUM RACKER
Model No. Features ShipWgt.
(lbs.)		 Price
Hand pump lift and hand crank manual tilt 428 $2,597
AC power lift and tilt 493 $4,733
Air power * lift and tilt 463 $4,779
Battery power ** lift and tilt 522 $4,756
AC power lift, hand crank manual tilt 450 $3,492
Air power * lift, hand crank manual tilt 451 $3,545
Batter power ** lift, hand crank manual tilt 530 $3,516
405M Spark resistant parts, hand pump lift and hand crank manual tilt 428 Upon
Request
405M-114 Spark resistant parts, air power* lift and tilt 463
405M-124 Spark resistant parts, air power* lift, hand crank manual tilt 451
Adaptor for 55-gallon rimmed plastic drum $198.90
MORStop, Tilt-Brake Installed on New Unit $228
MORStop Tilt-Brake for Existing Unit $228
OPTION, MORStop tilt-brake with "steel-it" epoxy paint $287
* Install Filter, Regulator and Lubricator ( Part # 3869-P) in accordance with air motor manufacturer’s recommendations.
** 12V DC power lift includes battery, and 100/220V 50/60Hz AC charger.
Note: Existing manual lift models can be converted to power lift.
Order Power-Lift Option for “Field installation,” such as 0-120FI, 0-124FI, or 0-125FI.
OPTIONS AND ACCESSORIES
Handle your 55-Gallon Plastic Drum
 MORStop™ Tilt-Brake
We recommend the MORStop Tilt-Brake to automatically stop
and hold the drum tilt angle on models with manual tilt control!
It functions smoothly and quietly in both directions. Without
the MORStop Tilt-Brake, a heavy unbalanced drum may tilt out
of control.
Adaptor for your 55-gallon plastic drum (part # AP405)
provides pads to support the
flexible sidewalls - Requires a
drum with suitable top rim for
chine catches to engage.		 plastic drums
Part # 3900i-P Factory installed
on new unit with manual tilt.		 morstop tilt-brake
Lift an upright plastic drum
Rack plastic drum (Drum cradle
    on rack must be no wider than
   11" for plastic drums)
Kit # 3900-P For field installation
on manual tilt models.
Pour plastic drum
Not for placing plastic drum
onto rotator. Not for use
with 405M series with spark
resistant parts.
POWER-LIFT & TILT OPTIONS
Power Lift and Tilt Options make drum handling easier and faster. There are two hand valve controls:
One for the power-lift function and a second for power-tilt. These options include gear covers.
electric power lift & tilt air power lift & tilt battery power lift & tilt
AIR POWER LIFT & TILT
Option #114
Similar to Option 124 above,
except with a second valve
controlling the hydraulically
driven drum tilt.
ELECTRIC POWER LIFT & TILT
Option #110
Similar to Option 120 above,
except with a second valve
controlling the hydraulically
driven drum tilt.		 BATTERY POWER LIFT & TILT
Option #115
Similar to Option 125 above,
except with a second valve
controlling the hydraulically
driven drum tilt.
POWER-LIFT OPTIONS
Power-Lift Options ease drum lifting, but retain manual tilt control. Hand crank tilt control is on 60” lift height units.
Models with 72” and 96" lift heights have pull chain and chain wheel tilt control.
electric power lift air motor power lift battery power lift
AIR MOTOR POWER LIFT
Option #124
Use on/off valve* to raise the
drum. Lower the drum with
manual release valve.		 BATTERY POWER LIFT
Option #125
Self contained battery power-lift.
A charger is included for wall or
shelf mount. Use valve to raise
and lower the drum.
ELECTRIC POWER LIFT
Option #120
Use switch to raise the drum.
Lower the drum with manual
release valve.
Existing manual lift models can be converted to power lift.
Order Power-Lift Kit for “Field installation,” such as O-120FI, O-124FI, or O-125FI.
Rack, Rotate, Pour Drums, Morse, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters, Barrel Handling, Drum
Carriers, Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting Equipment, and Drum Stackers from your
source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart