|
STANDARD
WELDED STEEL BAR GRATING
|
|
19W4
& 19W2 1 3/16" CENTER TO CENTER OF BEARING BARS
|
|
|
|
|
Welded
Steel Bar Grating is the most popular of all
grating types due to its strength, cost-efficient production
and ease of installation. Universally used in most general
industrial plants as well as commercial buildings, it has
wide applications as walkways, platforms, safety
barriers, drainage covers and ventilation grates. |
|
 |
|
|
|
It
is also ideal for use as mezzanine decking since it
supports the same loads as comparable solid flooring.
More than that, its cost saving openness maximizes the
circulation of air, light, heat, water and sound, while
promoting cleanliness. And, where insurance codes
permit, additional sprinklers can often be eliminated.
Standard panels are available in widths of 2', 3' or 4'. |
|
|
|
|
 |
|
|
|
Welded
steel bar grating is resistance welded to create a
rugged, one-piece constructed panel. The bearing bars
are automatically resistance welded at the contact point
with the cross bars and, under a combination of high heat
and pressure, are fused together to form a permanent
joint. The cross bars provide a high degree of rigidity,
yet retain a smooth flat surface for free and easy walking. |
|
|
|
|
 |
|
|
|
All
panels listed are 3 ft. wide x either 20 ft. or 24 ft. long.
Panels
are painted black; one end is untrimmed. |
|
|
|
|
|
|
Add
$0.63 sq. ft. for serrated panels (3/4 x 1/8 not available
serrated) |
|
|
MINIMUM
ORDER OF ONE PANEL - LESS THAN ONE
PANEL: ADD $124.83 CUTTING CHARGE |
|
|
|
|
Add
$0.63 sq. ft. for 2 ft. wide panels |
|
|
|