 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
 |
|
|
ResinDek®
Mezzanine
Flooring Panels
3/4" thick panels
|
|
ResinDek
Mezzanine Flooring Panels have been engineered and developed
to be the superior
choice for distribution centers and material handling
experts. |
|
|
|
All
ResinDek panels have been certified to contain a minimum
of 84% Pre-Consumer Recycled Content
(dry weight basis) |
|
|
| ResinDek
Finishes |
|
| Clear
Diamond Seal and Gray Diamond Seal finishes: |
|
 Outperform
other products in withstanding gouge and taber abrasion
tests. |
|
Have
exceptional resistance to common stains and have been
tested in accordance with NEMA LD 3.4 with 29
different reagents. |
|
| Are
more skid-resistant than other floor panels (coefficient
of friction test data available upon request). |
|
| Gray
Diamond Seal and ESD
are stock finishes. Clear Diamond Seal is available
in truckload quantities. |
|
| ResinDek®
MD - (Up to 3,000 lbs) |
|
|
 |
|
|
|
ResinDek
MD is a medium duty, mezzanine flooring panel that provides
a durable,
showcase appearance that is easy to maintain for years.
With higher density, wood
fiber and resin content than LD, MD is the right mezzanine
deck solution for
supporting live and dead pallet jack loads up to 3,000
lbs.
Available in Gray Diamond Seal®, Clear Diamond Seal®,
and Electrostatic
Dissipative (ESD) finishes, ResinDek MD provides a
stain, scratch and skid
resistant surface that won't delaminate like other decking
materials. Installation of
ResinDek MD is easy over corrugated
metal B-decking (use 18 ga.) with
recommended fastening systems. |
|
|
|
|
|
|
|
 |
|
|
|
ResinDek
Fastening Systems |
|
|
|
We furnish
ResinDek top side drill screws and Invisi-Loc® underside
fastening
system to enhance structural integrity and appearance
of your ResinDek panels.
For conventional topside installations, we offer ResinDek
drill screws with
computer color matched heads.
Our Invisi-Loc® underside fastening system secures
the fastener heads beneath
the flooring, rather than on top, when smooth floors
are preferred.
Pre-punched metal corrugated decking (priced per
specific project requirements
only) establishes the fastener pattern and eliminates
metal shaving safety hazards.
We provide innovative solutions to the challenges encountered
at distribution
centers worldwide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I.
Invisi-Loc Underside Fastening System
Invisi-Loc® provides showcase mezzanine floors with
no visible fasteners that are dependable, inexpensive
and easy to install. They reduce installation time in
drilling and eliminate metal shaving safety concerns.
The Invisi-Loc
fastening system mounts fasteners under mezzanine decking
hiding unsightly screw holes on top.
Invisi-Loc
fasteners have been tested with over 12 years of simulated
pallet jack traffic resulting in no fastener or panel
failures. (Tests were based upon 50,000 cycles/12 years
of pallet jack wheel traffic at specified ResinDek®
loads).
With outstanding
holding power, only 24 Invisi-Loc fasteners (see Figure
A) are required per 4' x 8' sheet and a standard
medium duty air compressor supplies the required power.
All installation
tools can be purchased.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Figure
A
Invisi-Loc® Underside Fastening System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
How it
Works:
Corrugated metal decking is pre-punched (priced
per specific project
requirements only) and metal
B-deck (use 18 ga.) is fastened to the bar
joists like other steel decking using drilling screws,
pins or welding.
During installation
of mezzanine decking, ResinDek® panels are laid
down with
metal panel spacers to properly gap the floor. Special
drill bits for pre-drilling the
ResinDek® panels to the precise depth and diameter
are then used to pre-drill
for the Invisi-Loc fasteners. With weight applied to
the top surface, the Invisi-Loc
fasteners are mounted to the underside.
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When installed according to specifications the Invisi-Loc
Underside Fastening System carries a 7-year warranty.
Please contact
us for product details, warranty and tool sales.
|
|
|
|
|
|
|
|
|
|
Bundle
Qty
|
Description |
Measurements
|
Price Each
(In Bundle Qty) |
|
32
|
ResinDek MD w/Gray Diamond Seal T&G 2LE |
.75" x 47.875" x 95.875"
|
$133.66 |
|
32
|
ResinDek MD ESD w/Gray Diamond Seal
T&G 2LE |
.75" x 47.875" x 95.875"
|
$147.51 |
|
|
|
|
|
|
1
|
ResinDek Drill Screws - Gray or Beige |
1,000/box
|
$210.00 |
|
10
|
ResinDek Drill Screws - Gray or Beige |
1,000/box
|
$1,900.00 |
|
1
|
ResinDek ESD Grounding Screws |
1,000/box
|
$180.00 |
|
|
|
|
|
|
1
|
Set Up Charge for ESD order under
250 panels |
|
$500.00 |
|
|
|
|
|
|
1
|
Less Than Unit (added to any order under 1 full
bundle) |
|
$75.00 |
|
|
|
|
|
|
1
|
Stand Up Screw Gun for Top Side Installation |
|
$750.00 |
|
| Mezzanine
Floor Selector |
|
|
|
|
|
|
|
|
|
|
1. Which
type of mezzanine flooring should you select for your
needs?
(Look at the chart below to see a summary of product
strengths and weaknesses.)
|
|
|
|
|
|
|
|
|
|
|
| Rank of Products:
6 = Best, 1 = Worst Rating |
| |
Plywood
OSB
|
Plywood/OSB
with HDPE
Laminate
|
Bar
Grate
|
Concrete
|
UV
Coated
Particle Board
|
ResinDek
|
| Material
Cost |
6
|
3
|
2
|
1
|
4
|
5
|
| Wheel
Load Cap |
1
|
2
|
4
|
6
|
3
|
5
|
| Tolerances |
2
|
1
|
4
|
3
|
6
|
6
|
Delamination
Resistance |
1
|
2
|
6
|
6
|
6
|
6
|
Scratch
Resistance |
1
|
4
|
6
|
5
|
2
|
3
|
| ESD
Issues |
4
|
1
|
5
|
3
|
2
|
6
|
| Cleanability |
1
|
3
|
6
|
4
|
3
|
6
|
| Warranty |
1
|
4
|
1
|
1
|
4
|
6
|
| Price
Volatility |
2
|
3
|
1
|
5
|
5
|
5
|
| Customer
Satisfaction |
1
|
2
|
4
|
4
|
4
|
6
|
| Total
Score |
20
|
25
|
39
|
38
|
39
|
54
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.
Which ResinDek product grade is right for your application?
(ResinDek panels are available in 4 grades.) |
|
|
|
|
|
Panel Grade |
Live & Dead Pallet Jack Loads Permitted |
|
ResinDek® LD |
Foot Traffic and up to 2,000 lbs. Total Load |
|
ResinDek® MD |
Foot Traffic and up to 3,000 lbs. Total Load |
|
ResinDek® HD |
Foot Traffic and up to 4,500 lbs. Total Load |
ResinDek® Xpan®
(no corrugated required) |
16" on center - up to 3,000 lbs.
24" on center - up to 2,700 lbs.
32" on center - up to 2,300 lbs.
40" on center - up to 2,000 lbs. |
|
|
|
|
|
| 3.
Which ResinDek product finish is right for your application? |
|
|
|
|
Jobsite Requirement |
Gray Diamond
Seal® |
Clear Diamond
Seal® |
ResinDek®
ESD |
ResinDek®
Unfinished (UF) |
|
Cleanable Surface |
x |
x |
x |
|
|
Superior Stain Resistance |
x |
x |
x |
|
|
Skid Resistant Surface |
x |
x |
x |
|
|
Showcase Look |
x |
x |
x |
|
|
High Gloss Floor |
x |
x |
x |
|
|
Superior Scratch Resistance |
x |
x |
x |
|
|
Economical Finish |
x |
x |
|
|
|
Warranty |
x |
x |
x |
x |
|
Static Controlled Floor |
|
|
x |
|
|
|
|
|
| Fire
Treatment |
|
ResinDek®
panels are classified as interior floor finishes, and
as such, require no fire treatment for either storage
or industrial
use occupancies, which covers Mezzanines, Pick Modules,
and Industrial Equipment Platforms. Code Officials from
the
IBC have verified this information for us.
If necessary, we can furnish ASTM-E-84 flame tunnel test
data for ResinDek panels. However, this data is based
upon
flame that is applied directly to the panels from below,
with no protection. The corrugated metal is a non-combustible
surface that will keep this flame from reaching the underside
of the ResinDek panels. Additionally, if there is
an actual fire
from below, the un-insulated corrugated metal roof deck
will collapse from heat stress long before the ResinDek
panels
can catch fire. ResinDek is not a structural part of the
floor. The corrugated and the bar joists are designed
to carry the
entire load.
IBC 804.5 lays out two additional requirements for interior
floor finishes. Specifically, interior floor finishes
are required to
meet Class I or Class II ratings for Critical Radiant
Flux, and are also required to pass the DOC FF-1 "Pill
Test".
| | | |
