
 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 In RI:(401) 421-0314 Fax:(401) 421-5679 |
 |
|
|
 |
Back
to Product Category
| OPERATION
PROCEDURE |
|
|
|
|
|
|
|
|
|
|
|
Bondor
NEVERLIFT is the easiest to operate of all lever-operated dock
levelers in America today. Each
NEVERLIFT model comes with a ball-tipped steel lever. With the
lever in the operating slot, the operator simply pulls
the lever to a position that is approximately 50° away from
dock edge. This lifts the deck and lip. Next, the operator
returns the lever to its original vertical position. This extends
the unit outward and allows it to rest in the trailer. There's
absolutely no required back bending, no lifting, no difficult
push toward the dock edge, and no leaning over the dock
edge. Just pull back, then return to the original position.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
First,
pull back on the lever
to the 2 o'clock postion,
approximately 50° away
from dock edge. |
Then,
return the lever to
the 12 o'clock position.
That's all it takes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIZE
SELECTIONS |
|
INSTALLATION |
|
|
|
|
|
|
|
|
|
|
|
Bondor's
edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application. |
|
For
an existing dock without a minimum 8" channel, an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Total
projection of bumper blocks and bumpers is 15". |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Prices
"NL" Series NeverLift Edge of Dock Leveler (Lever
Model) |
|
Model No |
Deck
Width |
Total
Unit Width |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
|
NL-66 |
66" |
104" |
$931 |
$975 |
$1,141 |
$1,224 |
|
Wt. |
515# |
530# |
545# |
630# |
|
NL-72 |
72" |
110" |
$956 |
$1,007 |
$1,154 |
$1,269 |
|
Wt. |
545# |
560# |
570# |
655# |
|
NL-78 |
78" |
116" |
$1,097 |
$1,141 |
$1,269 |
$1,466 |
|
Wt. |
580# |
595# |
605# |
690# |
|
NL-84 |
84" |
122" |
$1,383 |
$1,447 |
$1,505 |
$1,721 |
|
Wt. |
620# |
635# |
645# |
730# |
|
|
|
| Common
"EOD" Options |
|
Description |
Price |
|
17" Lip for Refrigerated Trailers |
$108.38 |
|
U.S. Post Office Model with 3" Run Off Guards (HED
only) |
$337.88 |
|
Tapered Lip (Tapered At Sides) |
$108.38 |
|
Abrasive Deck Surface Over 4 Way |
$223.13 |
|
Solid Bar Handle for NeverLift |
$31.88 |
|
Extended Pipe Handle for Neverlift (Standard on 30k &
35k CIR) |
$31.88 |
|
Low Profile Design (Flat Center Plate) Pallet-Jack Applications |
$76.50 |
|
Stainless Steel Hinge Pins |
$286.88 |
|
Cold Spray Metalized |
Consult Us |
|
Torsion Spring (Extension Mechanism) DL Series Only |
N/C |
|
Recessed EOD with Laminated Bumpers (1 Pair) (In Lieu
of Standard) |
-$30.00 |
|
Extra Heavy Duty Sliding Bump Block Series Wall Mounting
Bracket (1 Pair) (in lieu of standard) |
$121.13 |
|
Steel Face Bumpers (1 Pair) (in lieu of standard) |
$89.25 |
|
No Bumpers / Bumper Blocks (1 Pair) |
-$75.00 |
|
Special Paint |
Consult Us |
|
Grey Bump Blocks |
$25.50 |
|
|
| Common
"EOD" Accessories |
|
Model No |
Description |
Price |
|
DL96 |
Dock Ladder 7"x16"x45" with 36" dual
grab bar built into ladder |
$274.13 |
|
DL80 |
Dock Ladder 7"x16"x45" with single grab
bar (detached) |
$210.38 |
|
DOTH9260 |
Trash Can Holders |
$133.88 |
|
KIT3650 |
Safety Flag |
$76.50 |
|
|
| "EOD"
Installation Accessories |
|
|
Model No. |
Description |
Weight |
Price |
|
DOTH-3816 |
66" Four-Sided Box Assembly |
235# |
$459.00 |
|
DOTH-3836 |
72" Four-Sided Box Assembly |
250# |
$484.50 |
|
DOTH-3851 |
78" Four-Sided Assembly |
265# |
$510.00 |
|
DOTH-9036 |
Embed Channel 8" x 120" |
156# |
$369.75 |
|
DOTH-9040 |
Embed Channel 10" x 120" |
175# |
$395.25 |
|
DOTH-9050 |
Ramp Approach Plate 1/4"x12"x120" with
'Break', includes Anchor Bolts |
113# |
$382.50 |
|
DOTH-9051 |
Ramp Approach Plate 1/4"x18"x120" with
'Break', includes Anchor Bolts |
170# |
$446.25 |
|
DOTH-9052 |
Ramp Approach Plate 1/4"x24"x120" with
'Break', includes Anchor Bolts |
226# |
$510.00 |
|
DOTH-9054 |
Ramp Approach Plate 1/4"x36"x120" with
'Break', includes Anchor Bolts |
338# |
$624.75 |
|
DOTH-9055 |
Ramp Approach Plate 3/8"x12"x120" with
'Break', includes Anchor Bolts |
164# |
$459.00 |
|
DOTH-9056 |
Ramp Approach Plate 3/8"x18"x120" with
'Break', includes Anchor Bolts |
246# |
$541.88 |
|
DOTH-9057 |
Ramp Approach Plate 3/8"x24"x120" with
'Break', includes Anchor Bolts |
327# |
$618.38 |
|
DOTH-9058 |
Ramp Approach Plate 3/8"x36"x120" with
'Break', includes Anchor Bolts |
612# |
$784.13 |
|
DOTH-9059 |
Ramp Approach Plate 3/8"x48"x120" with
'Break', includes Anchor Bolts |
897# |
$975.38 |
|
DOTH-9072 |
Face Plate 1/4"x9"x120" with Anchor Bolts |
76# |
$267.75 |
|
DOTH-9073 |
Face Plate 1/4"x12"x120" with Anchor Bolts |
102# |
$286.88 |
|
DOTH-9074 |
Face Plate 1/4"x15"x120" with Anchor Bolts |
127# |
$318.75 |
|
DOTH-9066 |
Formed Angle 1/4"x8"x10"x120" |
151# |
$363.38 |
|
DOTH-9067 |
Formed Angle 1/4"x8"x10"x120" with
Break |
151# |
$395.25 |
|
DOTH-9068 |
Formed Angle 1/4"x12"x14"x120" |
217# |
$414.38 |
|
DOTH-9069 |
Formed Angle 1/4"x12"x14"x120" with
Break |
217# |
$452.63 |
|
DKIT-9915 |
Installation Kit-included (4) angles 1/4"x2"x2"x6
& 17 Anchor Bolts |
6# |
$127.50 |
|
DKIT-9914 |
TOD Install Kit |
|
$127.50 |
|
DOTH-1003 |
Gray Touch Up Spray Paint |
|
$15.30 |
|
DOTH-1004 |
Orange Touch Up Spray Paint |
|
$15.30 |
|
DOTH-2079 |
Anchor Bolts 5/8"x5" (Round Heads) |
|
$6.38 |
|
|
DLM,
Dock Leveler, Dock Levelers, Edge Of Dock Leveler, Edge Of Dock
Levelers, Loading Dock Leveler, Loading Dock Levelers,
Mechanical Dock Leveler, and Neverlift from your complete source
for material handling equipment. |
Back
to Product Category |
 |
|