FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Index Order Search Quote Info About Us Services
Back to Product Category
EDGE-OF-DOCK-LEVELERS
Hydraulically-Operated, Edge-of-Dock Levelers
Standard Features
NEMA 4 push button control panel.
Cold-rolled steel hinge pin for added strength
    and long life.
Grease Fittings Throughout
High-strength steel safety tread plate, 70,000
    yield.
THE BEST EDGE-OF-DOCK LEVELERS
The reasons are simple:
Heavy Duty Bumper Blocks with 4" x 12" x 13"
    Tuf-Cord Bumpers.
Bondor edge-of-dock levelers have a low initial cost -
even lower than a comparably rated portable plate.
Maintenance is seldom required. They're ideal for retrofit.
No pit is necessary. They're tough, highly efficient, easy
and safe to operate.
Bumper Projection = 18"
Full Hydraulic Lip & Deck Cylinders.
Secondary Gussets for Added Strength and
    Extended Life.

Various Bondor edge-of-dock models differ primarily
by the lift mechanism used. Each is offered in two
standard widths and conservatively rated capacities of
20000 and 25000 lb.
You'll not find an edge-of-dock leveler that's stronger.
Or that comes with a stronger heritage.
HED6620 in up position
Total projection of bumper blocks and bumpers is 18" on hydraulic
units.
GENERAL DESCRIPTION SIMPLE MAINTENANCE AND ADJUSTMENTS
Bondor edge-of-dock levelers mount to dock face and
provide a working range of 5" above to 5" below dock.
The units are offered with mechanical or hydraulic
operation.		 Properly installed and operated, periodic lubrication is
the only routine maintenance. On hydraulic models, a
front mounted control adjusts descent speed.  Hydraulic
fluid is commonly available, Dextron II® ATF.
Deck and lip are constructed with high-strength steel
safety tread plate, 5500 psi (or better) minimum yield.
Extended life bumpers are molded of first quality rubber.
Bumper blocks are 5/16" steel with a full length, re-
inforcing center gusset. Long life hinges include grease
fittings throughout.		 INSTALLATION
For an existing dock without a minimum 8" channel, an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available.
HYDRAULICALLY-OPERATED MODELS
Bondor hydraulically-operated models offer the
convenience and safety of push-button control.  Our
hydraulic design is superior for many reasons.  It offers
power extension and retraction.  The hydraulic lip lock
automatically releases upon contact with a trailer or lip
keepers, and safely yields upon impact from trucks.
 (Patents awarded and pending.)  Lip and deck have
separate cylinders.  Our exclusive speed control adjusts
leveler descent speed.
SIZE SELECTIONS
Bondor's edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application.
Prices For "HED" Series Hydraulic Edge of Dock
Model No Deck
Width		 Total
Unit Width		 20,000 CIR 25,000 CIR 30,000 CIR 35,000 CIR
HED-66 66" 104" $2,729 $2,780 $2,869 $2,964
WT. 605# 620# 635# 720#
HED-72 72" 110' $2,805 $2,856 $2,945 $3,041
WT. 635# 650# 665# 750#
HED-78 78" 116" $2,945 $2,990 $3,079 $3,175
WT. 670# 685# 700# 785#
HED-84 84" 122" $3,086 $3,137 $3,226 $3,321
WT. 710# 725# 740# 825#
Common "EOD" Options
Description Price
17" Lip for Refrigerated Trailers $108.38
U.S. Post Office Model with 3" Run Off Guards (HED only) $337.88
Tapered Lip (Tapered At Sides) $108.38
Abrasive Deck Surface Over 4 Way $223.13
Solid Bar Handle for NeverLift $31.88
Extended Pipe Handle for Neverlift (Standard on 30k & 35k CIR) $31.88
Low Profile Design (Flat Center Plate) Pallet-Jack Applications $76.50
Stainless Steel Hinge Pins $286.88
Cold Spray Metalized Consult Us
Torsion Spring (Extension Mechanism) DL Series Only N/C
Recessed EOD with Laminated Bumpers (1 Pair) (In Lieu of Standard) -$30.00
Extra Heavy Duty Sliding Bump Block Series Wall Mounting Bracket (1 Pair) (in lieu of standard) $121.13
Steel Face Bumpers (1 Pair) (in lieu of standard) $89.25
No Bumpers / Bumper Blocks (1 Pair) -$75.00
Special Paint Consult Us
Grey Bump Blocks $25.50
Common "EOD" Accessories
Model No Description Price
DL96 Dock Ladder 7"x16"x45" with 36" dual grab bar built into ladder $274.13
DL80 Dock Ladder 7"x16"x45" with single grab bar (detached) $210.38
DOTH9260 Trash Can Holders $133.88
KIT3650 Safety Flag $76.50
"EOD" Installation Accessories
Model No. Description Weight Price
DOTH-3816 66" Four-Sided Box Assembly 235# $459.00
DOTH-3836 72" Four-Sided Box Assembly 250# $484.50
DOTH-3851 78" Four-Sided Assembly 265# $510.00
DOTH-9036 Embed Channel 8" x 120" 156# $369.75
DOTH-9040 Embed Channel 10" x 120" 175# $395.25
DOTH-9050 Ramp Approach Plate 1/4"x12"x120" with 'Break', includes Anchor Bolts 113# $382.50
DOTH-9051 Ramp Approach Plate 1/4"x18"x120" with 'Break', includes Anchor Bolts 170# $446.25
DOTH-9052 Ramp Approach Plate 1/4"x24"x120" with 'Break', includes Anchor Bolts 226# $510.00
DOTH-9054 Ramp Approach Plate 1/4"x36"x120" with 'Break', includes Anchor Bolts 338# $624.75
DOTH-9055 Ramp Approach Plate 3/8"x12"x120" with 'Break', includes Anchor Bolts 164# $459.00
DOTH-9056 Ramp Approach Plate 3/8"x18"x120" with 'Break', includes Anchor Bolts 246# $541.88
DOTH-9057 Ramp Approach Plate 3/8"x24"x120" with 'Break', includes Anchor Bolts 327# $618.38
DOTH-9058 Ramp Approach Plate 3/8"x36"x120" with 'Break', includes Anchor Bolts 612# $784.13
DOTH-9059 Ramp Approach Plate 3/8"x48"x120" with 'Break', includes Anchor Bolts 897# $975.38
DOTH-9072 Face Plate 1/4"x9"x120" with Anchor Bolts 76# $267.75
DOTH-9073 Face Plate 1/4"x12"x120" with Anchor Bolts 102# $286.88
DOTH-9074 Face Plate 1/4"x15"x120" with Anchor Bolts 127# $318.75
DOTH-9066 Formed Angle 1/4"x8"x10"x120" 151# $363.38
DOTH-9067 Formed Angle 1/4"x8"x10"x120" with Break 151# $395.25
DOTH-9068 Formed Angle 1/4"x12"x14"x120" 217# $414.38
DOTH-9069 Formed Angle 1/4"x12"x14"x120" with Break 217# $452.63
DKIT-9915 Installation Kit-included (4) angles 1/4"x2"x2"x6 & 17 Anchor Bolts 6# $127.50
DKIT-9914 TOD Install Kit   $127.50
DOTH-1003 Gray Touch Up Spray Paint   $15.30
DOTH-1004 Orange Touch Up Spray Paint   $15.30
DOTH-2079 Anchor Bolts 5/8"x5" (Round Heads)   $6.38
DLM, Dock Leveler, Dock Levelers, Edge Of Dock Leveler, Edge Of Dock Levelers, Hydraulic Dock Leveler, Hydraulic Dock Levelers,
Hydraulic Dock Plates, and Loading Dock Levelers from your complete source for material handling equipment
Back to Product Category
Visa - MasterCard - AMEX
Home - Index - Order - Search - Quote - Info - About Us - Services